Water Leak Sensor Water Meter Leak Detector

Water alarm for leak detection can detect whether the water level is exceeded.When the water level is higher than the set level, the detection foot will be submerged.

The detector will alarm immediately to prompt the exceeded water level to users.

Small size water alarm can be used in small places, controllable sound switch, automatically stop after ringing 60 seconds, easy to use.

 

How it Works?

• Remove the insulation paper
  Open the battery cover, remove the white insulation paper, the battery in the Leak Alert should be changed on an annual basis at minimum.
• Place It On the Detecting Location
  Place a Leak Alert in any location where there is a potential for water damage and flooding such as in the: Bathroom/ Laundry Room/ Kitchen/ Basement/ Garage ( Stick the tape to the back of the alarm and then stick it to the wall or other object, keeping the head of the detector perpendicular to the water level you want. )
• Open the on/off button
  Lay the water leak alarm flat with the metal contacts facing down and touching the surface. Open the on/off button on the left, When the water sensor alarm metal sensing contacts come into contact with water, a loud 110 dB alarm sounds. To minimize property damage, respond to the alarm as quickly as possible.
• Correct placement
  Please be sure that the detector head should be at a right angle of 90 degrees to the measured water surface.
• The Alarm will automatically stop after ringing 60 seconds and message will be sent to your phone